Body Piercing Process
|Blue Banana 4mm Flame Skull Logo Dermal Top (Black)|
|Blue Banana 5mm Glitter Dermal Top (Crystal Clear)|
The body piercing process begins with understanding exactly what body piercing is. The professional process creates openings or punctures in specific areas of the body using a sharp, sterile, surgical steel needle known as a cannula. These openings are created for the placement of jewellery and other forms of bodily decoration. The body piercing process will vary depending on the area of the body getting pierced.
As a rule, the first step of the body piercing process begins by finding a reputable, experienced body piercer who practices with high standards of cleanliness and safety. Piercing studios should only use new, sterile equipment for each and every customer. It is imperative that the body piercing process be sterile to prevent infection to the client. Specialist tools and equipment should be used throughout the whole procedure. All reputable businesses should have new and unopened needles for each piercing and customer, as well as cleaning fluids, fresh jewellery and sterilised equipment. You should not let anyone start the body piercing process without these tools.
Unsurprisingly, the body piercing process is different for certain areas of the body. Special tools are used for creating the correct puncture size for that area of the body. Some professionals may use a piercing gun or may prefer to use a surgical steel needle. Piercing needles are sized by gauge. As a general rule, this is how the body piercing process will go:
The body piercer will examine the area for scars or other skin problems to make sure it is safe for piercing.
The chosen area will be thoroughly cleaned with an antibacterial solution before the whole process begins. Body hair may be shaved off if needed, as in the case of an eyebrow piercing.
The piercer will mark the location of the needle insertion using a sterile disposable marker. This will include an entrance point and an exit point.
At this time, the piercer may decide to clamp the area with forceps to steady the skin for a straight, even puncture, making the body piercing process easier for them. Clamping also reduces blood flow which helps numb the area to pain if freezing or anaesthetics aren't used.
The piercer will ask you if you are ready. When you are, the area will be pierced with a surgical steel cannula that comes wrapped in a plastic sheath. Once the needle is removed, this plastic sheath remains in place.
The clamp is removed, starter jewellery inserted and then the sheath is removed. After the body piercing process is through, you will be given instructions on caring for your new piercing to prevent any infections. The studio will also let you know what the average healing time is for your item, bringing the body piercing process to an end.
Article Disclaimer: For more information, please view our article guides terms and conditions page.